Solids control processing

NEW METHODS FOR MUD SOLIDS CONTROL OPTIMIZATION ON THE RIG

More sophisticated mud systems in the North Sea has drastically changed the concept of mud solids control on the rig. Getting a “better handle” on mud costs and reducing the pollution associated with losses on surface have become major concerns for the Operator and have resulted in a focus on the efficiency of mud mechanical […]

Share
Three shakers

Automation Improves Shale Shaker Performance

One of the limitations of current shale shakers is that their performance can be adversely affected by changes in the feed rate. Standard shakers operate with vibratory motors running at a constant speed, yielding a continual output force. This leads to a shaker having its peak g-force during non-loaded conditions. As soon as drilling fluid […]

Share
A bird's eye view shale shaker

ELEMENTAL COMPOSITION OF AIRBORNE DUST IN THE SHALE SHAKER HOUSE DURING AN OFFSHORE DRILLING OPERATION

INTRODUCTION DURING the operation of a drilling rig the Shale Shaker House serves as an area where immediately upon return from the borehole the drilling mud undergoes reconditioning in preparation for recirculation. Drilling mud is generally composed of liquids (water or oil-based) mixed with suspended, finely divided solids of various types . The drilling mud […]

Share
vibration screens

RECONFIGURABLE VIBRATING SCREEN

Different designs of vibrating screens Product Name Description Control Mechanism Super heavy vibrating screen The model is created by virtual prototype technology It involves two harmonic vibrations which are perpendicular and have the same frequency. The acceleration and displacement were obtained with Simulink software. Multi-dimensional vibrating screen The design involved the figure of vibrating screen, […]

Share
Insulated-diesel-tank - 11

Thermal Diesel Storage Tank

Our diesel tank’s benefit 1. Customizable configuration for optimal solutions to users. 2. The raw material is from top MFG. Such as HBIS, BAOGANG, etc. Ensure the quality essentially. 3. Tank will be welded with bended steel plate. The welding line will do flaw detection and pressure test. 4. All the tanks adopted man hole, […]

Share
drilling mud

Three Example of Solids Removal Efficiency, Mud Usage and Equilibrium Drill Solids Content

The concepts of solids removal efficiency, mud usage, and equilibrium drill solids can be related together with a simple equation. These concepts are used to post analyze wells, illustrating typical drilling fluid and solids control problems. Evaluation of the entire system of solids control equipment and control techniques and the mud system can be accomplished by […]

Share
MUD TANKS

How to Properly Operate Mud Tanks

Properly operated mud tanks something that comes with experience. This experience comes from a number of hours of on-the-job training from a confident trainer. The idea of mud tanks is to be able to contain maintain and reuse. The drilling fluid in a cost-effective fabricated matter to this day. There are a lot of operations […]

Share
shale shaker

Dynamics Analysis of a Linear Shale Shaker

A drilling fluid shale shaker is a vibrator used for solid/liquid separation. The purpose of using a shaker is to recover drilling fluid and remove large solids as most as possible. With rapid development of drilling new technology, the demand for drilling fluid solids control is getting higher and higher. Much research work on vibration principle, […]

Share
coatings diesel tank

Coatings and insulation of diesel tank

Bulk storage diesel tanks are no choice but to have them set out in the elements. If traditionally insulated, it is very likely that moisture will make its way into the insulation and on the surface of these tanks. Diesel tanks that hold product over 320°F (160°C) may seem to be resistant to CUI owing […]

Share
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17