Drying Shaker

drying shaker

Drying shaker is used for manage and recovery more valuable mud solids by drilling waste management from the primary solids control equipment.

How drying shaker work

Drilling cuttings discharged from the primary shale shaker and desander.desilters will be taken up by a screw conveyor, and another screw conveyor will take the drilling cuttings to feed to the High G drying Shaker. Some times, client will install a low profile drying shaker just under the solids control tank to feed the drying shaker directly. The drilling cuttings will be drying by the high G shaker, and fluids will be cached by the tank under the shaker, a centrifuge feed pump will take the fluids and feed to a high speed decanter centrifuge, after treatment by the high speed decanter centrifuge, the fluids can return back the active mud system for resue.

drying shaker

Why choose AiPu drying shaker

With high G force up to 8 and adjustable, AiPu’s drying shaker unit could be fixed with a fine mesh screen so that it can remove silts and ultra-fine sands, provide solids in consistently scalable and conveyable form and require no expensive chemicals or polymers.

Technical Parameters

Model Hunter-MG4-HG Hunter-D4-HG
Max Capacity 100t/h 100t/h
Screen Area 2.73M2 3.02M2
Screen Panel 4 4
Max G Force 8.0G 8.0G
Deck Angle Range -1 - +5° -1 - +5°
Dimension 3040x1670x1376mm 3455×1650×1500mm
Weight 1750KG 18800KG

Aipu drying shaker benefit

⊕High vibration force
up to 8.0 G which is adjustable depending on drilling cuttings

⊕Anti-Corrosion Stainless Steel for the shaker bottom frame is durable.

⊕Rubber sealing structure between shaker screen and shaker bottom frame to make operators easy to change screen.

⊕Wedged type shaker screen locking system for fast screen replacement.

⊕Mechanical drive shale shaker deck angle adjustment while working system.

⊕Rubber Covered dumping spring for less noise,safety and longer life.

drying shaker detail

Share
2 comments
  1. Suarez Niño
    Suarez Niño
    September 1, 2020 at 4:16 pm

    Dear sir.

    We are interesting to buy a Hunter-MG4-HG for 10 tph.

    Pleasec send you best offert including FOB prices and delivery time to my mail.

    Regards

    Reply
    • lebowski
      lebowski • Post Author •
      September 2, 2020 at 3:09 am

      Hello Pablo. I have sent an email to you, please check.

      Reply
Leave a Reply

Your email address will not be published. Required fields are marked *