First of all，AIPU deliveried 1 set of double deck shale shaker for oil sludge treatment to job site last week. Because this double deck shale shaker start building after an oil show meeting with client, so we try our best to serve the client both in quality and delivery time . As the client work for oil sludge treatment and the shaker designed for first phase mechanical separation. So the screen panel choose sieve type panel for longer and better performance. And there are different working solution for oil sludge and depending on budget and treating result you need. Normally the oil sludge heated for easy and better separation by reduce it’s viscosity.
Double Deck Shale Shaker Main Features
1.Linear motion shale shaker with 2 sets of Martin vibrator motor to reach 7.0G force. The 2 sets of vibrating motor will balance horizontal strengths and the shaker deck vibrating linear motion finally.
2.Sieve type screen panel will help screen working longer time and allow some of the solids particles pass by, the final result is oil sludge solids particles get a dryer separation. The top deck use a coarse mesh for first phase separation, bottom deck use a finer mesh for second phase separation.
3.3 layers of anti-corrosive painting for a whole shaker. All painting procedure are inside of room for paint protection to keep sure good service and painting protection.
4.Wedge type shaker screen for fast lock and screen panel replacement. The wedge as one of the shaker spare parts which can ordered from us as well.
5.Shaker deck angle adjustment can be from -1 to 5 degree depending on oil slurry condition. The working principle is 2 panels oil sludge fluids content and last deck for dry solids content. If fluids less than 2panels, then adjust angle lower, if fluids more than 2 panels, then adjust angle high.
6.Desander or desilter cyclone can be installed depending on requirement.
So please kindly contact us freely if you interested in our shale shaker.