Shale shaker are components of solids control equipment used in many industries. Such as oil and gas drilling,coal bed methan(CBM), horizontal directional drilling(HDD),diamond drilling,water drilling,etc.
Solids control shale shakers
Shale shaker is also referred to vibrating screen. One method of removing solids from drilling mud is to pass the mud over the surface of a vibrating screen. Particles smaller than the openings in the screen pass through the holes of the screen along with the liquid phase of the mud. Particles too large to pass through the screen thereby separated from the mud for disposal. Basically, a screen acts as a“go-no-go” gauge: Either a particle is small enough to pass through the screen or it is not.
Double Deck Shale Shaker Main Features
1. Linear motion shale shaker with 2 sets of Martin vibrator motor to reach 7.0G force. The 2 sets of vibrating motor will balance horizontal strengths and the shaker deck vibrating linear motion finally.
2. Sieve type screen panel will help screen working longer time and allow some of the solids particles pass by, the final result is oil sludge solids particles get a dryer separation. The top deck use a coarse mesh for first phase separation, bottom deck use a finer mesh for second phase separation.
3.3 layers of anti-corrosive painting for a whole shaker. All painting procedure are inside of room for paint protection to keep sure good service and painting protection.
4.Wedge type shaker screen for fast lock and screen panel replacement. The wedge as one of the shaker spare parts which can be ordered from us.
5.Shaker deck angle adjustment can be from -1 to 5 degree depending on oil slurry condition. The working principle is 2 panels oil sludge fluids content and last deck for dry solids content. If fluids less than 2panels, then adjust angle lower, if fluids more than 2 panels, then adjust angle high.
Please contact us freely if you need any help.