API Certified Shale Shaker for Drilling Waste Reduction

Drilling waste reduction is both an environmental imperative and an economic opportunity. An API certified shale shaker from Aipu Solids Control addresses waste at its source by maximizing the separation of drilled cuttings from reusable drilling fluid. With over 15 years of manufacturing experience, Aipu has developed shakers that deliver exceptional waste reduction performance.

The waste reduction process begins with effective primary solids separation. Aipu Hunter series shakers, operating at 6.0G to 7.5G of acceleration driven by premium Ital-Vibras, Martin, and Oli vibrating motors, provide the aggressive separation that produces drier cuttings and recovers more drilling fluid for reuse. Every barrel of drilling fluid recovered at the shaker is a barrel that does not require dilution, treatment, or disposal. For expensive oil-based and synthetic-based mud systems, the economic value of this fluid recovery is substantial—often exceeding the capital cost of the shaker equipment over a single well program.

Adjustable deck angles from minus 1 degree to plus 5 degrees give operators precise control over the cuttings residence time on screen panels. Steeper angles accelerate cuttings discharge and improve dewatering, while flatter angles allow more time for fluid drainage when throughput is high. This adjustability, combined with Aipu’s quick-change screen system, enables operators to optimize waste reduction for each drilling section. A progressive screen strategy—coarser screens for surface hole where large cuttings volumes dominate, finer screens for production zones where separation quality matters most—further enhances the waste reduction effectiveness of Aipu shakers.

Better solids removal at the shaker stage also reduces the waste burden on downstream equipment. Desanders, desilters, and centrifuges operate more effectively when the shaker has already removed the bulk of coarse solids. This system-level waste reduction effect extends equipment life, reduces maintenance requirements, and improves the overall efficiency of the solids control system. Aipu’s API Q1 certified manufacturing ensures that this waste reduction performance is consistent and reliable, supported by documented quality controls and factory acceptance testing on every unit produced in our 50,000 square meter Xi’an facility.

Aipu equipment operates in more than 30 countries worldwide, demonstrating reliable waste reduction performance across diverse drilling environments and regulatory frameworks. For operators facing increasingly stringent waste disposal regulations, Aipu shakers provide the proven performance needed for environmental compliance and sustainable drilling operations.

Partner with Aipu for certified quality. Contact us at info@aipusolidcontrol.com to discuss your requirements and discover the Aipu difference in API Q1 certified solids control equipment.